Analog Turntable

TN-420-TD

Turn, Turn, Turn...

TN-420-TD
TN-420-TD

Analog Turntable

TN-420-TD

SPECIFICATIONS

This model has been discontinued.

Spec description

Turntable section  
Drive System Belt Drive
Motor DC Motor
Speed 33-⅓ RPM, 45 RPM
Wow and Flutter 0.2%
Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast
Diameter of Platter 30cm  /  12"
Tone-arm section  
Type Static Balance, S-shaped
Effective Arm Length 223mm  /  8.8"
Stylus Pressure Range 0 to 5g
Supported Cartridge Weight 2.5 to 5.5g
Anti-skating Adjustment Supported
Cartridge section  
Type MM type (audio-technica AT95E factory installed)
Stylus Shape Elliptical
Stylus Construction Bonded Round Shank
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 20dB at 1kHz
Channel Balance 2.0dB
Tracking Force 1.5 to 2.5g
Vertical Tracking Angle 20 degrees
Supported Load Impedance 47k ohms
Output Voltage 4.5mV ±3dB
Stylus Pressure 2.0g ±0.5g
Cartridge Weight 5.7g ±0.5g
Head-shell Weight 11g (including Screws, Nuts and Wires)
Replacement Stylus audio-technica ATN95E
Phono EQ section  
Type of Amplifier MM type (On/Thru switchable)
Analog Output section  
Connector RCA Pin jack (Gold-plated)
Output Voltage Phono/Line switchable
Phono Output 4.5mV ±3dB
Line Output 120mV (–13dBV)
USB Output section  
Connector USB B type
Output Signal PCM 48kHz/16-bit
Supported OS Windows 7, Windows 8, Windows 8.1, Windows 10
OS X Lion (10.7) or later
Power AC 100 to 240V, 50/60Hz
Power Consumption 1.5W (less than 0.5W at Standby)
Overall Dimensions
(W x H x D)
420 × 117 × 356 mm  /  16.5" × 4.6" × 14.0"
Weight Approx. 4.9 kg  /  10.8 lbs.
Included Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet for Dust Cover ×2, Hinge ×2, RCA Audio Cable, USB Cable, AC Adapter (GPE053A-120050-Z), Owner's Manual (including Warranty Card)

※ RoHS complied.
※ Specification and design may subject to change.